ALWAYS read all label directions on all products prior to using, and only use as directed.
USE A SEPARATE, PLASTIC MEASURING CUP for each chemical
USE A SEPARATE, NON-CONTAMINATED BUCKET to mix the chemical into the water.
For chemicals that require pre-mixing with water, ALWAYS add the chemical to the water. NEVER add water to the chemical.
NEVER mix one chemical with another chemical prior to adding to the water.
Use a separate bucket for each chemical you mix into the water, and never mix more than one chemical into the water in any bucket.
NEVER add chemicals to the water when people are in the pool.
Be sure to only add one chemical to the pool at a time and allow time for each chemical to circulate before adding another.
There are chlorinated products that are not compatible when mixed.
NEVER mix different types or brands of chlorine together.
NEVER mix chemicals together.
DO NOT use quantities in excess of the recommended dosage on the label.
After shock treating, you MUST wait until the free available chlorine residual is at the level recommended by the label instructions.
DO NOT use contents of unlabeled containers.
Keep all chemicals out of the reach of children.
Be sure to properly store and handle chemicals in accordance with label instructions.
Store chemicals in a clean, cool, dry location out of direct sunlight.
Containers should always be kept closed when not in use.
PROPERLY DISPOSE of all containers. Do not reuse empty chemical containers.
WASH YOUR HANDS THOROUGHLY after handling the chemicals.
NOTE: If you encounter any problems, take a water sample for a complete test and analysis to your Regal® dealer. They can meet your pool care needs quickly and cost effectively.